Gaggenau VI422105, Руководство пользователя и инструкции по установке, Страница: 19 / 40

Home Connect
en
19
16.3 Exiting the basic settings menu
▶
Push the control knob in. While the control knob is
pushed in, carry out the following steps without in-
terruption:
‒
Turn the control knob one notch anti-clockwise to
position ⁠ ⁠.
‒
Turn the control knob three notches clockwise to
position 1 ⁠.
‒
Turn the control knob two notches anti-clockwise
to position 0 ⁠.
a goes out.
a
The illuminated ring on the control knob goes out.
17 Home Connect
This appliance can be networked. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its current operating status. It is not pos-
sible to perform a remote start or set a power level.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
"Safety", Page 3
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
17.1 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect has
been set up and whether the appliance is connected to
your home network.
17.2 Setting up
To configure settings via Home Connect, install the
Home Connect app on your mobile device and set it
up.
Connect your appliance to the home network (i.e. the
router) and to the Home Connect app (on a mobile
device, e.g. a smartphone or tablet).
You can connect your appliance to the home network
manually or automatically. Establish the connection to
the home network and then the connection to the
Home Connect app.
The app will guide you through the entire registration
process. In case of doubt, follow the instructions in the
app.
Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.