background image

15

 After-sales service      

en

After-sales service

After-sales service

Our after-sales service is there for you if your appliance 

needs to be repaired. We will always find an appropriate 
solution, also in order to avoid after-sales personnel 
having to make unnecessary visits.

E number and FD number

When calling us, please quote the full product number 
(E no.) and the production number (FD no.) so that we 
can provide you with the correct advice. The rating plate 
that features these numbers can be found on the 
underside of the appliance.

To save time, you can make a note of the numbers for 
your appliance and the telephone number of the after-
sales service in the space below in case you need them.

Please note that a visit from an after-sales service 
engineer is not free of charge in the event that the 
appliance has been misused, even during the warranty 
period.

Please find the contact data of all countries in the 
enclosed customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest 
assured that the repair will be carried out by trained 
service technicians using original spare parts for your 
domestic appliance.

E no.

 

FD no.

 

After-sales service 

O

 

GB

0344 892 8988 
Calls charged at local or mobile rate.

IE

01450 2655 
0.03 € per minute at peak.  
Off peak 0.0088 € per minute.

AU

1300 368 339

NZ

09 477 0492

Z-Nr:

FD:

E-Nr:

Type:

Содержание VG425215AU

















Отзывы: