Gaggenau VG 295, Инструкция по эксплуатации

Страница: 10 / 44

10
Cleaning the electrode
Soiled electrodes may cause malfunctions when
igniting or flame monitor disturbance.
If necessary clean with the included brush. Be careful
when cleaning electrodes, they are fragile, do not
twist or damage.
Do not switch on the cooktop while
cleaning.
Burnt-in residues
To remove stubborn, burnt-in residues you can order
the grill cleaning gel (order number 463582) from your
specialist retailer or from our after-sales service. You
can use it to clean the pan supports, the burner parts
and the stainless steel cooktop base. If necessary
apply the gel and leave overnight. Please observe the
manufacturer’s instructions.
Discoloured burner parts
After prolonged operation, the burners (burner lid,
burner ring and burner head) will become darker
through natural oxidation. You can remove this
discoloration as follows:
1 Mix equal parts of white vinegar with a max. 8 %
acid (household vinegar) and warm water.
2 Soak the discolored burner parts for no longer
than 10 minutes in the solution. Remove stubborn
stains with a cloth or sponge.
3 Rinse the burner parts thoroughly in clear water
and dry completely before use.
Caution! The surface will be damaged if the solution
is too concentrated or the burner parts are left in
vinegar for too long!
Part/surface Recommended cleaning method
Stainless steel
surfaces Clean with a soft cloth and some soapy
water; polish dry with a soft cloth. Do not
use too much water to avoid water enter-
ing the appliance.
To remove stubborn residues or discol-
ouration because of the heat, you can
order a stainless-steel cleaner (order
number 464524) from your specialist
retailer or our after-sales service.
Pan support Carefully take off pan supports for clean-
ing. Soak in soapy water. Clean with a
brush and some detergent.
Be careful when cleaning around the
rubber rests to ensure they do not come
loose.
Rinse with clear water. Carefully dry pan
support before assembly.
Do not clean in a dishwasher!
Burner lid,
burner ring,
burner head
(brass) Take burner parts off for cleaning. Clean
in soapy water with a cloth and deter-
gent. Use brass polish to retain the origi-
nal shiny surface of the burner ring and
the burner lid.
Port openings of the burner ring must be
kept free. Be careful not to loose the
small parts.
Do not clean in a dishwasher!
Wok burner
head (enamel on
cast iron) Clean with detergent and brush. Dry
thoroughly before assembly.
Do not clean in a dishwasher!
Control panel Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Dry with a soft cloth.
Control knobs Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Caution! Damage to the appliance: Do
not pull off the control knobs to clean
them.