Gaggenau RF463905, Руководство пользователя

Страница: 16 / 33

16
en
Operating the appliance
Setting up the display screen
You can choose between the settings Reduced and
Standard . With the setting Reduced only the
temperature and active special functions are displayed
on the control panel after a short period without
operation. If the touch fields are touched, all buttons
will be visible again.
With the setting
Standard all buttons always remain
visible.
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button.
4 Use
C
button to move to the menu item Display
screen .
5 Press
%
button.
6 Press
B C
buttons to move to the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Setting the touch field colour
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button.
4 Press
C
button to move to the menu item Touch
field colour .
5 Press
%
button.
6 Press
B C
buttons to move to the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Setting the touch field tone type
You can change or switch off the sound of the tones
generated when pressing buttons.
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button to open the menu item.
4 Press
C
button to move to the menu item Touch
field tone type .
5 Press
%
button to open the menu item.
6 Press
B C
buttons to select the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Setting the touch field tone volume
You can adjust the volume level of the sounds generated
when pressing buttons.
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button to open the menu item.
4 Press
C
button to move to the menu item Touch
field tone volume .
5 Press
%
button to open the menu item.
6 Press
B C
buttons to select the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1 Press
à
button to open the main menu.
2 Press
B
button to move to the menu item Basic
settings .
3 Press
™
button to open the menu item.
4 Press
C
button to move to the menu item Signal
tone volume .
5 Press
%
button to open the menu item.
6 Press
B C
buttons to select the required setting.
7 Press
™
button.
The setting is saved.
8 Press
'
button to exit the menu.
Switching the water filter counter on
and off
If you have replaced the particle filter with a water filter,
switch the water filter counter on. This will remind you to
replace the water filter in good time.
1 Press
à
button to open the main menu.
2 Use
B
button to move to the Basic settings menu.
3 Press
™
button.
4 Use
C
button to move to the menu item Water filter
counter .
5 To change the setting, press
%
button.
6 Select the required setting.
7 Confirm the selection by pressing
™
button.