Gaggenau DI250441, Руководство по эксплуатации

Страница: 19 / 32

19
Cleaning and maintenance
Cleaning and maintenance
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time
and prevents problems.
Overall condition of the machine
〉
Check spray arm for grease and limescale
deposits.
If you find such deposits:
〉
Fill detergent dispenser with detergent. Start
the appliance without utensils in the programme
with the highest rinsing temperature.
Clean the appliance with detergents/appliance
cleaners which are particularly suitable for use with
dishwashers.
〉
To extend the life of your appliance, clean the
appliance regularly with a special dishwasher
detergent.
〉
To ensure that the door seal always remains clean
and hygienic, regularly clean it with a damp cloth
and a little washing-up liquid.
〉
If the appliance is switched off for a prolonged
period, leave the door ajar to prevent
the formation of an unpleasant odour.
Never use a steam cleaner to clean your dishwasher.
The manufacturer is not liable for any consequential
damage.
Regularly wipe the front of the appliance and fascia
with a damp cloth; water and a little washing up liquid
are adequate. Do not use sponges with a rough
surface or abrasive detergents, as these could scratch
the surfaces.
Stainless steel appliances: To prevent corrosion, avoid
using sponge cloths or wash them out thoroughly
several times before using for the first time.
m
Warning
Health hazard
Never use other domestic detergents, e.g. containing
chlorine!
Special salt and rinse aid
〉
Check the refill indicators
`
and
h
. If
required, refill salt and/or rinse aid.
Filters
The filters
1j
keep large foreign objects in the
rinsing water away from the pump. These foreign
objects may occasionally block the filters.
The filter system consists of a coarse filter, a flat fine
filter and a microfilter.
1 After each washing cycle check the filters for
residue.
2
Unscrew filter cylinder as illustrated and take out
filter system.
3
Remove any residue and clean filters under
running water.
4
Re-install filter system in reverse sequence and
ensure that the arrow marks are opposite each
other after closing the filter system.