en
Home Connect
16
Energy manager
„
Energy manager
With the energy manager
„
, your dishwasher
automatically starts during a time period you select with
the cheapest power supply offered at the time by your
alternative energy source (for example, photovoltaic
system).
If the energy manager
„
is unable to start the
dishwasher remotely (for example, due to insufficient
supply of power from the photovoltaic system), it will
start the dishwasher at the latest time possible using a
conventional power supply.
Note:
The “Energy manager” menu option is not
available unless there is a connection to the home
network and the dishwasher is connected to the app.
Setting up energy manager
„
:
To start connection, press the setting button
+
`
in
the “Energy manager” menu.
Connect your dishwasher to the energy manager of the
home system within the next 2 minutes. Also activate
connection on the energy manager of your home
system.(Observe the instruction manual of your energy
manager manufacturer.)
Following successful connection, the following text is
indicated on the display window at the top
@
: “Energy
management login successful”.
If connection is unsuccessful, repeat the process.
Further information and system requirements for using
the energy manager can be found at
www.home-
connect.com
.
Activating energy manager
„
:
To start the energy manager
„
, you must select time
preselection
h
(time period) and activate the remote
start button
˜
)"
.
Once you have activated the remote start button
˜
)"
,
you can use the Home Connect app to perform time
preselection
h
.
You can also activate the energy manager
„
manually
using the buttons on the dishwasher:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Select programme
0
.
4.
Press time preselection button
h
.
5.
Keep pressing the setting buttons
+ -
`
until the
time period displayed corresponds to your
requirements.
6.
Press START button
)2
.
This activates time preselection.
7.
Activate the remote start button
˜
)"
.
Following successful activation, “Flex” is indicated on
the display window at the top
@
. The energy
manager
„
now has access to the dishwasher and can
start it during the time period selected.
Notes
▯
Where the energy manager
„
starts the programme
earlier, the time display “Finish in” / “Finish at” will
be updated.
▯
To activate the energy manager
„
, you must have set
it up beforehand.
Deactivating energy manager
„
:
To disconnect, press the setting button
+
`
in the
“Energy manager” menu.
The energy manager is deactivated at the end of this
process. A new energy manager can now be connected.
Note:
The setting “Disconnect with +” is available only
when the dishwasher is connected to the energy
manager of the home system.
