Gaggenau DF480800, Руководство пользователя

Страница: 32 / 72

en
Before using for the first time
32
Setting Top basket Bottom basket
2 max. ø 18.5 cm 27.5 cm
3 max. ø 21 cm 25 cm
Before using for the first time
10 Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
10.1 Performing initial start-
up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Note:
The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance or other
residues. After installing and connect-
ing the appliance, we recommend
you start a Programme with the
highest cleaning temperature
→
Page 19 without tableware, deter-
gent, special salt or rinse aid.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→
"Home Connect quick start",
Page 46
Requirement:
The appliance has
been installed and connected.
→
Page 12
1.
Add special salt. → Page 33
2.
Add rinse aid. → Page 34
3.
Switch on the appliance.
a
The display shows the settings for
initial start-up.
4.
Press repeatedly until the display
shows the required setting.
Note:
If you select Initial start-up
Home Connect here, make further
settings using the Home Connect
app on your mobile device.
You can change the settings for
initial start-up and other Basic set-
tings →
Page 43 on the appliance
at any time or use the Home Con-
nect app on your mobile device.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press for
approx. 3 seconds.
Water softening system
11 Water softening sys-
tem
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
11.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.