Basic settings
en-us
29
Basic settings
15 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Selection
Description
Time setting
00:00 - 24:00
Set the current time.
The setting depends on the time format selected.
Time format
12 h
24 h
1
Set the time format.
Time display
In hours
Time
1
Set the time display for the end of the wash cycle.
"Finish in" shows the remaining time the wash cycle still
has to run, e.g. 3h 25min.
"Finish at" shows the time when the wash cycle will end,
e.g. 3:20pm.
Sprache/Language
See selection on the appli-
ance.
Select the menu language.
Water hardness
0 - 62
0 - 8
1
Set the water hardness.
"Overview of water hardness settings", Page 21
Rinse aid disp.
0 - 6
5
1
Set or switch off the amount of rinse aid to be dispensed.
"Setting the amount of rinse aid", Page 23
Sensor setting
Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
Extra Dry
on
off
1
Switch "Extra Dry" on or off for each operation.
The temperature is increased during the final rinse for a
better drying result. This may increase the run time slightly.
Please take care with delicate dishware.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the wash cycle, the average water and en-
ergy consumption is briefly shown on the display.
Emotion Light™
off
On via main switch
1
On when opening door
Switch the interior lighting of the appliance on or off.
When the appliance door is opened, the interior lighting
switches off automatically after 10 minutes.
Status Light
on
1
off
Switch "Status Light" on or off.
While the wash cycle is running, a strip of light appears on
the left-hand side of the appliance. If the appliance door is
not completely closed, the strip of light will flash. The wash
cycle has ended when the strip of light is no longer visible
on the left-hand side.
Start program
Auto 127-140°F
1
Prog. last selected
Set a default program for when the appliance is switched
on.
Tone volume
Scale with multiple levels.
Set the signal volume at the end of a wash cycle.
Level 0 switches the signal tones off.
Button volume
Scale with multiple levels
Set the button volume during operation.
Level 0 switches the button tones off.
Child-proof lock
on
off
1
Switch the Electric childproof lock
WLAN
on
off
Switch the wireless network connection on or off.
The basic setting "WLAN" is not available until you have
connected the appliance with the Home Connect® app.
Remote Start
off
Manual
Permanent
Activate or deactivate
The basic setting is not available until you have connected
the appliance with the Home Connect® app.
1
Factory setting (may vary according to model)
