Gaggenau DF480161CN, Инструкция по эксплуатации

Страница: 10 / 48

en
Getting to know your appliance
10
Switching on the appliance for the first time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top
@
:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1.
Keep pressing button >
)*
until the required setting
is displayed.
2.
Make the setting with setting buttons + -
X
.
3.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
--------
Settings
Switching on the appliance for
the first time Factory setting Infotext
by pressing Info button
{
Language Deutsch Language selection.
Time format 24h 12h or 24h.
Time setting 12:00 Set the current time.
Water hardness °E 16 - 20 medium Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp. Setting 5 Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection * Cold water Connection to hot water (40-60°C) or cold
water (<40°C) possible.
* depending on the features of your dishwasher