Gaggenau DF270101, Инструкция по применению

Страница: 42 / 72

en
Basic settings
42
Basic setting Selection Description
Eco drying off
On in all pro-
grammes
On with Eco 50°
1
Activate or deactivate automatic open-
ing of the appliance door during the
drying phase.
If the function has been activated, the
running time may increase.
→
"Eco drying", Page 13
WLAN on
off Switch the wireless network connec-
tion on or off.
The basic setting "WLAN" is only avail-
able once the appliance is connected
to the Home Connect app.
→
"Home Connect ", Page 43
Remote Start off
Manual
Permanent Activate or deactivate
→
"Remote Start ", Page 44 .
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→
"Home Connect ", Page 43
Greeting on
1
off
Switch display of the brand name logo
on or off when the appliance is
switched on.
Factory setting Reset Restore changed settings to the fact-
ory settings.
The settings for initial start-up must be
configured.
1
Factory setting (may vary according to model)
16.2 Changing basic settings
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
1.
Open the appliance door.
2.
Press ⁠.
3.
To open the basic settings, press
for approx. 3 seconds.
4.
Press repeatedly until the display
shows the required setting.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press for
approx. 3 seconds.
7.
Close the appliance door.
16.3 Setting the time
1.
To open the basic settings, press
for approx. 3 seconds.
2.
Press repeatedly until the display
shows "Time setting".
3.
Press or repeatedly until the
display shows the required time.
Holding down and will
change the set values in 10-minute
steps.
4.
To save the settings, press for
approx. 3 seconds.