Gaggenau DF250560, Руководство пользователя

Страница: 21 / 38

Operating the appliance
aus
21
½
extraDry *
extraDry
An increased temperature during the final rinse and an
extended drying phase ensure that even plastic parts
dry better. There is a slight increase in the energy
consumption.
ï
Shine and Dry *
Shine and Dry
By increasing the amount of water during the rinse
cycle and extending the drying phase, stains are
prevented and the drying result is improved. There is a
slight increase in the energy consumption. Rinse aid is
recommended for the high gloss drying function (even
when using combination detergents).
Ö
Energy Save *
Energy Save
The "Energy Save" function can be used to reduce
water and energy consumption. The run time is extended
for optimum cleaning and drying results.
Operating the appliance
Operating the appliance
Changing the settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
settings.
Change the setting as follows:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{8
for 3 seconds until the
following text is indicated on the display window at
the top
@
:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4.
Keep pressing button >
)"
until the required setting
is indicated on the display window at the top
@
.
5.
Make the setting with setting buttons + -
P
.
6.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
Tip: If you change several settings, first make all
changes in succession. Now press the Info button
{ 8
for 3 seconds. This saves all set values in the
appliance.
AquaSensor *
AquaSensor
* depending on the features of your dishwasher
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The AquaSensor is used according to the programme. If
the AquaSensor is active, “clean” rinsing water can be
transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If
the turbidity is greater, the water is drained and
is replaced with fresh water. In the automatic
programmes the temperature and running time can also
be adjusted to the degree of soiling.