Gaggenau DF210700, Руководство пользователя

Страница: 26 / 40

en-us
Troubleshooting
26
Troubleshooting
17 Troubleshooting
Troubleshooting
You can eliminate minor issues on your appliance your-
self. Please read the information on eliminating issues be-
fore contacting Customer Service. This may avoid unnec-
essary repair costs.
Issue Cause and troubleshooting
E:2060 lights up. Appliance has detected heating element is calcified.
1.
Descale the appliance.
2.
Operate the appliance with the Water softening system.
1
E:3000 lights up. Water protection system is activated.
1.
Turn off the water faucet.
2.
Call customer service
→
Page 33
.
E:3100 lights up. Water protection system is activated.
1.
Turn off the water faucet.
2.
Call customer service
→
Page 33
.
E:3400 lights up. Water is continuously running into the appliance.
1.
Turn off the water faucet.
2.
Call customer service
→
Page 33 .
E:3200 or indicator for water sup-
ply lights up.
Inlet hose is kinked.
▶
Install the inlet hose without kinks.
Water faucet is turned off.
▶
Turn on the faucet.
Water faucet is jammed or furred up.
▶
Turn on the faucet.
The flow rate must be at least 10 l/min when the water supply is open.
Filters in the water connection of the supply or AquaStop hose are blocked.
1.
Switch off the appliance.
2.
Pull out the power cord plug.
3.
Turn off the water faucet.
4.
Unscrew the water connection.
5.
Remove the filter from the supply hose.
6.
Clean the filter.
7.
Reinsert the filter in the supply hose.
8.
Screw the water connection back on.
9.
Check the water connection for leaks.
10.
Restore the power supply.
11.
Switch the appliance on.
E:9240 lights up. Filters are soiled or blocked.
▶
Clean the filters.
→
"Cleaning filters", Page 25
E:6103 lights up. Water is not
drained off.
Wastewater hose is blocked or kinked.
1.
Reposition the wastewater hose without kinks.
2.
Remove residues.
Siphon connection is still sealed.
▶
Check the connection to the siphon and open if necessary.
1
Depending on the appliance specifications