Gaggenau CX482612, Руководство по установке

Страница: 9 / 28

Installation procedure
en-us
9
3.7 Combining several Vario appliances
1.
If you want to combine several Vario appliances, the
connecting strip VA 420 000/001/010/011 is required.
You can purchase it separately as a special accessory.
Consider additional space requirement for the connect-
ing strip between the appliances when making the
cutout. Refer to the Installation Instructions of
VA 420 000/001/010/011.
The appliances can also be installed in individual
cutouts. Ensure a minimum distance of 2" (51 mm) be-
tween the appliances.
2.
When combining appliances with appliance cover and
appliances without appliance cover, you can use the ap-
pliance extensions VA 450 110/401/600/800/900 to bal-
ance out dimension differences, if required.
Installation procedure
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
countertop.
CAUTION
Sharp edges.
▶
Use protective gloves when installing the appliance.
CAUTION
The appliance is heavy.
▶
It is recommended that two people install this appliance.
4.1 Installing the heat shield
For safety reasons, the heat shield must be properly in-
stalled when closed cabinets are used. This prevents com-
ponents from overheating as a result of the recirculation of
hot air from the cooktop. The heat shield is the same width
as the cooktop.
CAUTION
Sharp edges.
▶
Use protective gloves when installing the heat shield.
Requirement: You have unpacked the cooktop.
▶
For shipping, the heat shield is screwed to the bottom of
the cooktop. Unscrew the fastening screw on heat
shield.
a
The heat shield will be able to rotate freely.
4.2 Securing the cooktop to the countertop
The cooktop must be secured from below using the hold-
down brackets provided, so it does not slip.
1.
Place the cooktop face down on a soft underground.