Gaggenau CX 492 611, Руководство пользователя, Страница: 26 / 44

en-us
Operation
26
1.
Remove the silicone cover from the lower section of the
cooking sensor casing and remove both screws using a
screwdriver.
2.
Open the cap on the cooking sensor. Remove the bat-
tery from the lower section of the casing and insert a
new battery. In doing so, pay attention to the correct
alignment of the battery terminals.
!
+
Note: Do not use any metal objects to remove the bat-
tery. Do not touch the battery terminals.
3.
Close the cap on the cooking sensor. The indentations
for the screws on the cap must be aligned with the in-
dentations on the lower section of the casing. Tighten
the screws with a screwdriver.
4.
Reattach the silicone cover back to the lower section of
the cooking sensor casing.
Note: Use only high-quality CR2032 batteries in order to
guarantee a long service life.
Declaration of Conformity
BSH Home Appliances Corporation hereby declares that
the appliance with wireless cooking sensor function meets
the basic requirements and other relevant provisions of
the Directive 2014/53/EU.
A detailed Declaration of Conformity in accordance with
Directive RED can be found at www.gaggenau.com on the
product page for your appliance under "Additional docu-
ments.
The logos and the Bluetooth® brand are registered trade-
marks and property of Bluetooth SIG, Inc. These trade-
marks are used by BSH Home Appliances Corporation un-
der licence. All other marks and trade names are the prop-
erty of the respective companies.
6.15 Single dynamic cooking
With this function, five default power levels are displayed
when you place an item of cookware cooking surface. This
allows you to change the power level during cooking by
moving the cookware forward or backward.
The default power levels are 1.0, 3.0, 5.0 7.0 and 9.0.