Gaggenau CV2821.1, Инструкция по применению

Страница: 20 / 40

en
Booster function for pots
20
a
The stopwatch function is stopped.
a
The displays go out.
14.4 Stopwatch function
The stopwatch function shows the time (in minutes and
seconds (mm.ss)) that has elapsed since the function
was activated. The stopwatch function operates inde-
pendently of all the other settings and does not auto-
matically switch off a cooking zone.
The maximum time is ​⁠ ​⁠ minutes and ​⁠ ​⁠ seconds ( ​⁠ ​⁠.
​⁠ ​⁠). Once this value is reached, the display goes back
to ​⁠ ​⁠. ​⁠ ​⁠.
Activating the stopwatch function
▶
Press ​⁠.
a
​⁠ ​⁠. ​⁠ ​⁠ appears in the stopwatch display.
a
The time counts down.
Interrupting the stopwatch function
1.
Press ​⁠.
a
The stopwatch function is stopped.
a
The stopwatch displays continue to light up.
2. Press ​⁠.
a
The time in the display continues to count down.
Deactivating the stopwatch function
▶
Press and hold ​⁠.
a The stopwatch function is stopped.
a
The stopwatch displays go out.
a
The stopwatch function has now been deactivated.
15 Booster function for pots
The booster function for pots allows you to heat up
large volumes of water more quickly than with power
level ​⁠.
The booster function for pots temporarily increases the
maximum output of the selected cooking zone.
The booster function for pots is available for one cook-
ing zone, provided the other cooking zone in the same
group is not in use.
A B
Note:
For the FlexZone, you can activate the function
even if you use this as a single cooking zone.
15.1 Activating the booster function for pots
1.
Select the cooking zone.
2. Press ​⁠.
a
​⁠ lights up.
a The function is activated.
15.2 Deactivating the booster function for
pots
1. Select the cooking zone.
2.
Press ​⁠.
3. Press the twist knob or select a different function.
a
​⁠ goes out.
a The cooking zone switches back to power level ​⁠.
a
The function is deactivated.
Notes
¡
In certain circumstances, the booster function for
pots may switch itself off automatically in order to
protect the electronic elements inside the hob.
¡
If a power level was set before activating the func-
tion, this is automatically applied again after deactiv-
ating the function.