Gaggenau CV2821.1, Инструкция по применению, Страница: 19 / 40

Timer function
en
19
14 Timer function
Your appliance comes with various functions for setting
the cooking time.
14.1 Cooking timer
The cooking zone automatically switches off after the
time that is set has elapsed. You can set a time from
1 minute to 99 minutes.
Setting the cooking timer
1.
Select the cooking zone.
2. Set the required heat setting.
3.
Press ​⁠.
a ​⁠ lights up. ​⁠ ​⁠ lights up in the timer display.
4.
Use the twist knob to set the required cooking time.
5. Press ​⁠ to confirm the selected cooking time.
a
The cooking time begins to elapse.
a Once the cooking time has elapsed, the cooking
zone switches itself off.
a
A signal tone sounds.
a
The heat setting shows ​⁠ and ​⁠ ​⁠ flashes in the timer
display.
6.
Press any symbol or press the twist knob.
a
The signal tone stops.
a
The displays go out.
Notes
¡
The cooking time elapses in the timer display in
minutes, the final half a minute is displayed in
seconds.
¡
To call up the remaining cooking time, select the
corresponding cooking zone. The cooking time is
displayed for 10 seconds.
¡
If you set a cooking time for several cooking zones,
the cooking time that ends first appears in the timer
display. The ​⁠ display lights up orange in the cook-
ing zone.
¡
If you select the FlexZone as the only cooking zone,
the set cooking time for the entire cooking zone is
the same.
¡
When you set a cooking time for a cooking zone
and the frying sensor is activated, the cooking time
starts counting down immediately and not when the
selected temperature setting has been reached.
Changing the cooking timer
1.
Select the cooking zone.
2.
Press ​⁠.
3.
Use the twist knob to set the required cooking time.
Deleting the cooking timer
1.
Select the cooking zone.
2.
Press ​⁠.
3.
Use the twist knob to set the cooking time to ​⁠ ​⁠.
14.2 Short-term timer
You can use the short-term timer to set a time of up to
​⁠ ​⁠ minutes and, once this time has elapsed, a signal
tone sounds for 3 minutes. The short-term timer runs
independently of all other settings and does not auto-
matically switch off a cooking zone.
Setting the short-term timer
1.
Press ​⁠.
a
​⁠ ​⁠ appears in the short-term timer display.
2.
Use the twist knob to set the required time.
3.
Press ​⁠ to confirm the selected cooking time.
a
The time starts to elapse.
Changing the short-term timer
1.
Press ​⁠.
2. Use the twist knob to set the required time.
Deleting the short-term timer
1. Press ​⁠.
2.
Use the twist knob to set the time to ​⁠ ​⁠.
Switching off the short-term timer
Requirement:
Once the time has elapsed, a signal
tone sounds. ​⁠ ​⁠ flashes.
▶
Press ​⁠.
a
The display goes out.
a
The signal tone stops.
14.3 Timer plus
You can use Timer plus to activate a stopwatch func-
tion. The stopwatch function shows you the elapsed
time since the end of the set timer time.
Setting Timer plus
▶
Press and hold ​⁠ for a few seconds before the sig-
nal tone ceases.
a
The display for the stopwatch shows the elapsed
time since the end of the set time.
a
The time that was previously set flashes in the timer
display.
Ending Timer plus
▶
Press and hold ​⁠.