27
Service programmes
en
Descaling
Duration: approx. 21 minutes
1
Turn the function selector to
S
.
2
Select "Descaling programme" using the rotary
selector.
3
Touch the
™
symbol.
The descaling programme starts. The notes in the
display guide you through the programme.
4
Empty and replace the drip tray and the coffee
dregs container.
5
Remove the water filter (if there is one) and touch
the
™
symbol.
6
Pour lukewarm water into the empty water tank up
to the "calc" mark (0.5 l) and then dissolve a
descaling tablet in it.
7
Remove the milk tube from the milk container and
wipe it down. Insert the end of the milk tube into the
hole in the coffee residue container.
8
Close the door.
9
Place a container with a capacity of 0.5 l under the
beverage dispenser.
10
Touch the
I
symbol.
The programme will run for approx. 19 minutes.
Note:
If there is too little descaling solution in the
water tank, the message "Fill water tank with water
and descaler" appears. Pour lukewarm water into
the empty water tank up to the "calc" mark (0.5 l)
and then dissolve a descaling tablet in it. Press
™
to confirm. The programme will continue.
11
When prompted by the display, rinse the water tank
and then fill it with fresh water up to the "max" mark.
If a filter is used, reinsert it now.
12
Touch the
I
symbol.
The programme will run for approx. 2 minutes and
rinse the appliance.
13
Empty and replace the drip tray.
14
Touch the
™
symbol.
The programme has finished.
15
Touch the
™
symbol.
The appliance is ready to use.
Cleaning and descaling
Duration: approx. 26 minutes
The cleaning and descaling programme combines the
individual cleaning and descaling functions. If the two
programmes are both due at around the same time, the
fully automatic espresso machine automatically
suggests this service programme.
Prior to starting the service programme, clean the
brewing unit.
1
Turn the function selector to
S
.
2
Select "Cleaning and descaling programme" using
the rotary selector.
3
Touch the
™
symbol.
The cleaning and descaling programme starts. The
notes on the display guide you through the
programme.
4
Empty and replace the drip tray and the coffee
dregs container.
5
Place a cleaning tablet in the ground coffee drawer
and close the drawer again.
6
Remove the water filter (if there is one) and touch
the
™
symbol.
7
Pour lukewarm water into the empty water tank up
to the "calc" mark (0.5 l) and then dissolve a
descaling tablet in it.
8
Remove the milk tube from the milk container and
wipe it down. Insert the end of the milk tube into the
hole in the coffee residue container.
9
Close the door.
10
Place a container with a capacity of 0.5 l under the
beverage dispenser.
11
Touch the
I
symbol.
The programme will run for approx. 19 minutes.
Note:
If there is too little descaling solution in the
water tank, the message "Fill water tank with water
and descaler" appears. Pour lukewarm water into
the empty water tank up to the "calc" mark (0.5 l)
and then dissolve a descaling tablet in it. Press
™
to confirm. The programme will continue.
