22
en
Basic settings
Setting the milk container weight
Using the weight, the appliance detects the quantity of
milk in the milk container to ensure that there is always
sufficient milk to dispense e.g. Latte Macchiato. If there
is too little milk in the container, a corresponding
message will be displayed.
The weight of the supplied empty milk container and
that of an empty Tetra Pak carton (approx. 30 g) are
already saved under "Standard". The appliance
automatically detects whether the milk container or a
Tetra Pak carton is being used. However, you can also
save the weight of your own milk container or a Tetra
Pak carton (if its weight deviates from the standard
value) under the "Individual" setting.
Note:
The container filled with milk must not exceed the
maximum weight of 2 kg.
1
Rotate the function selector to
S
.
2
Select "Basic settings" using the rotary selector.
3
Touch the
™
symbol.
4
Select "Milk container weight" with the rotary
selector.
5
Touch the
%
symbol.
6
Select "Standard" (preset milk container weight) or
"Individual" (own weight input for the milk
container) using the rotary selector.
7
Press
™
to confirm.
8
With the "Standard" setting the appliance
automatically reverts to the "Basic settings"
selection level
or
With the "Individual" setting, your own milk
container can now be weighed and the weight
saved.
9
Check whether the area for the milk container
behind the door is free. Confirm with
™
.
10
Place an empty container, e.g. a milk jug, in the area
and confirm with
™
.
11
Close the door.
The weight of the container is determined and then
displayed.
12
Press
™
to confirm.
The changes are saved.
13
Touch the
'
symbol to leave the "Basic settings"
menu.
Messages
Depending on the setting in "Basic settings" or when
dispensing a beverage with milk, various reminders or
messages may be shown on the display:
"Reminder: Is the
milk still fresh?"
Appears after a set time.
Please check whether the milk in the
milk container is fresh.
"Reminder: Place
milk in the refriger-
ator"
Appears when the appliance is switched
off.
"Milk container
connected?"
Message appears after selection of a
beverage with milk. Please check and
confirm.
"Not enough milk
for the selected
beverage"
Message appears when there is not
enough milk in the milk container.
