17
Preparing beverages
en
Preparing hot water
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on and the water tank
filled.
1
Remove the milk hose from the milk container.
2
Rotate the function selector to position 2.
3
Select "Hot water" using the rotary selector.
4
Place a cup or glass under the coffee dispenser.
5
Touch the
C
symbol.
6
Set the size using the rotary selector.
7
Touch the
C
symbol.
8
Set the temperature using the rotary selector.
9
Press
™
to confirm.
10
Press
I
to start.
The water is heated and then flows into the cup or glass.
Notes
–
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
–
Using the
‡
symbol, you can save the current
beverage: Touch the
‡
symbol, turn the function
selector to a free memory location and save the
entry.
~
"Individual beverages" on page 18
Setting the grinding level
m
Warning – Risk of injury!
Do not reach into the grinding unit.
Using the slider for the grinding level, the desired
fineness of the ground coffee can be set between a fine
grinding level (left) and a coarser grinding level (right).
Notes
–
The new setting only becomes noticeable after the
second cup of coffee.
–
Set a finer grinding level with dark-roasted beans
and a coarser grinding level with lighter beans.
–
If the display shows the message "Set coarser
grinding level", the coffee beans are being ground
too finely. Set a coarser grinding level. To do so,
slide the slider to the right.
–
Only make small changes to the grinding level
setting.
Changing bean type
If you are using a new type of bean, the Empty grind
function allows you to run the grinding unit until empty
of your previous bean type.
The appliance must be switched on.
1
Remove the bean container and empty out the
beans.
2
Add the new beans and reinsert the bean container.
The message "New type of coffee beans in bean
container?" appears.
3
Press
™
to confirm.
The grinding unit is then emptied of your previous bean
type in two grinding stages.
Note:
This message always appears when the bean
container is inserted. If you do not want to empty the
grinding unit, e.g. when only refilling with beans,
confirm with
'
.
