Gaggenau CI 294, Инструкция по эксплуатации

Страница: 12 / 60

12
en
Getting to know your appliance
Touch keys
When the hob heats up, the symbols for the touch keys
available at this time light up.
Touching a symbol activates the associated function. A
confirmation signal sounds.
Notes
– The corresponding symbols for the touch keys light
up depending on whether they are available.
The indicators for the available functions light up in
white. Once a function is selected, its indicator
lights up in orange.
– Always keep the control panel clean and dry.
Moisture can prevent it from working properly.
– Do not pull cookware close to the displays and
sensors. The electronics could overheat.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
▯
Display
•
: High temperature
▯
Display
œ
: Low temperature
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for
as long as the hotplate is still warm.
Cooking zones
Û
/
$
Single cooking zone Use cookware that is a suitable size.
ò
Three-ring cooking zone This ring switches on automatically when you use cookware with a base that cov-
ers the outer zone (
ð
or
ò
).
á
FlexZone See the section entitled
~
"Flex function"
Only use cookware suitable for induction cooking; see section
~
"Induction cooking"