Gaggenau CI 294, Инструкция по эксплуатации

Страница: 21 / 60

21
Booster function for pots
en
Timer plus
If you press and hold the symbol
Š
for a few seconds
before the audible signal ceases, the stopwatch is
activated.
The display for the stopwatch shows the elapsed time
since the end of the set timer time. The time that was
previously set flashes in the timer display.
Press and hold the
Š
symbol for a few seconds. This
stops the stopwatch, and the indicators go out.
The function has been deactivated.
Stopwatch function
The stopwatch shows the cooking time that has elapsed
so far in minutes and seconds (mm.ss). The maximum
duration is 99 minutes and 59 seconds (99.59). If this
value is reached, the display starts again at 00.00.
The stopwatch works independently of the hotplates and
other settings. This function does not automatically
switch off a hotplate.
Activating
Touch the
®
symbol.
‹‹
.
‹‹
appears in the stopwatch
display.
The time begins to elapse.
Deactivating
Touching the
®
symbol stops the stopwatch function.
The stopwatch displays remain lit.
If you touch the
®
symbol again while it is still orange,
the time will continue to elapse.
If you touch and hold the
®
symbol, the displays will go
out.
The function is deactivated.
v
Booster function for pots
Booster function for pots
This function allows large volumes of water to be heated
up even more quickly than with power setting
Š
. The
saucepan booster function temporarily increases the
maximum output of the selected hotplate.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration).
Note: The booster function can also be activated on the
flexible cooking zone if this is being used as a single
hotplate.
Activating
1 Select the hotplate.
2 Touch the
Ž
symbol.
The
˜
indicator lights up.
The function has now been activated.
Deactivating
1 Select the hotplate.
2 Touch the
Ž
symbol, turn the twist knob or select a
different function.
The
˜
indicator goes out and the hotplate switches
back to the
Š
heat setting.
The function is deactivated.
Notes
– In certain circumstances, this function may switch
itself off automatically in order to protect the
electronic elements inside the hob.
– If a heat setting was set before activating function,
this setting will be automatically applied again after
deactivating the function.