Gaggenau CI 294, Инструкция по эксплуатации

Страница: 18 / 60

18
en
Transfer function
u
Transfer function
Transfer function
You can use this function to transfer the power level, set
cooking time and selected cooking sensor function from
one cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone that is switched on to another cooking
zone.
This function can also be used on the flexible cooking
zones.
Note: You can find additional information on the correct
positioning of the cookware in the section on
~
"Flex
function"
1 Remove any cookware from the hob.
The hotplate display starts flashing. The hotplate
does not heat up.
2 Set the cookware down on a flexible hotplate within
the next 90 seconds. The new hotplate is detected
and the
ˆ
symbol lights up. The heat setting that
has been applied flashes in the hotplate display.
3 Select the new hotplate within 90 seconds using
the twist knob. The setting has been transferred.
Notes
– Move the cookware to a cooking zone that is not
switched on, that you have not yet preset or on
which no other cookware has been placed
previously.
– If the Flex function is activated by moving an item of
cookware across the flexible cooking zone, the
settings are automatically applied.
– The booster functions can only be moved from left
to right or from right to left when none of the
cooking zones are active.
– If a new item of cookware is set down on a different
cooking zone before the settings have been
confirmed, this function will be ready for both
cooking vessels. Confirm the required cooking
zone.
– If you move more than one item of cookware, the
function is only ready to use for the item of
cookware that was last moved.
– When you place the cookware back in this position,
the same settings is used.
X|
Y| [|
\|
Z|
X|
Y| [|
\|
Å
Z|