Gaggenau CI 292 602, Руководство пользователя

Страница: 31 / 48

Operation
en-us
31
4.
Reattach the silicone cover back to the lower section of
the cooking sensor casing.
Note: Use only high-quality CR2032 batteries in order to
guarantee a long service life.
Declaration of Conformity
BSH Home Appliances Corporation hereby declares that
the appliance with wireless cooking sensor function meets
the basic requirements and other relevant provisions of
the Directive 2014/53/EU.
A detailed Declaration of Conformity in accordance with
Directive RED can be found at www.gaggenau.com on the
product page for your appliance under "Additional docu-
ments.
The logos and the Bluetooth® brand are registered trade-
marks and property of Bluetooth SIG, Inc. These trade-
marks are used by BSH Home Appliances Corporation un-
der licence. All other marks and trade names are the prop-
erty of the respective companies.
7.13 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
Activating the panel lock
Requirement: The cooktop is turned off.
▶
Remove the twist knob from the cooktop.
a
A signal sounds.
a
lights up for 10 seconds.
a
The control panel is locked.
Deactivating the panel lock
▶
Place the twist knob onto the twist pad.
a
The control panel is unlocked.
Note: Removing the twist knob when the cooktop is
switched on initially activates the display cleaning protec-
tion. If you do not place the twist knob back on after
10 minutes, the cooktop switches itself off and the panel
lock is activated.
7.14 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating the display cleaning protection
With this function, you can clean the control panel while
the cooktop is switched on, without accidentally changing
any settings.
▶
Remove the twist knob from the cooktop.
a
A signal sounds.
a
and the cooktop settings are blinking.
a
The heating process is interrupted.
a
If a timer is running, it will be paused.
a
The control panel is locked for 10 minutes.
Note: If you do not place the twist knob back on after
10 minutes, the cooktop switches itself off and the panel
lock is activated.
Deactivating the display cleaning protection
▶
Put the twist knob back onto the twist pad within 10 min-
utes.
a
The control panel is unlocked. Operation is resumed.
7.15 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Signal tones
- All signals are switched on.
1
- Most of the signals are switched off.
Time for setting a cooking zone after selec-
tion
- The cooking zone remains selected for
5 seconds.
- The cooking zone remains selected for
10 seconds. 1
- The cooking zone remains selected for
15 seconds.
- Unlimited: The last selected cooking
zone remains selected. You can adjust the
settings without having to select it again.
Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated 1 , 2
– 1.000 W minimum power
⁠. – 1.500 W
...
– 3.000 W recommended for 13 A
⁠. – 3.500 W recommended for 16 A
– 4.000 W
⁠. – 4.500 W recommended for 20 A
...
or ⁠. – Maximum power of the cooktop
2
Restore factory settings
- Keep personal settings.
1
- Restore factory settings.
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate