Gaggenau CI 292 602, Руководство пользователя

Страница: 15 / 48

Operation
en-us
15
Possible cook-
ware positions
Explanation
The cookware takes up more than one
of the positions shown above.
Position the cookware starting on the
upper or lower edge of the flexible
cooking zone.
Flexible cooking zone as two separate cooking zones
Possible cook-
ware positions
Explanation
The front and rear cooking zones each
have two induction elements. They can
be used independently of each other.
Use only one item of cookware on each
cooking zone.
Select the required heat setting for
each of the cooking zones.
Restrictions
Not possible
cookware po-
sition
Explanation
Position the cookware so that is covers
only one of the flexible cooking zones.
Otherwise, the cooking zones will not
be activated as intended and the cook-
ing result will not be satisfactory.
Using the flexible zone as two separate cooking
zones
▶
Make the settings for each cooking zone independently.
→
"Cooking zone settings", Page 13
Note: The flexible cooking zone operates as two separate
cooking zones as a default. If you want the Flex function to
be activated automatically you can adjust the basic set-
tings.
Activating the Flex function
1.
Place the cookware on the flexible cooking zone.
2.
Select one of the two cooking zones that belong to the
flexible cooking zone.
3.
Press ⁠.
a
lights up in the cooking zone area.
4.
Set the power level.
a
The power level is displayed on both cooking zone dis-
plays.
Note: If both cooking zones are set to different power lev-
els before being linked, both cooking zones switch to 0.
Changing the power level for the flexible cooking
zone
1.
Select one of the two cooking zones of the flexible
cooking zone and adjust the power level with the twist
knob.
2.
Change the power level using the twist knob.
Deactivating the Flex function
1.
Select one of the two cooking zones that belong to the
flexible cooking zone.
2.
Press ⁠.
a
lights up in the cooking zone area.
a
The flexible cooking zone is split into two separate
cooking zones.
Note: If the cooking zone is switched off, and then
switched back on again later, the flexible cooking zone is
reset to function as two independent cooking zones.
7.5 Transfer function
You can use this function to transfer the settings from one
cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone you are using to another cooking zone.
You can also use this function on the flexible cooking
zone. For additional information on how to position the
cookware, refer to the information on using the flexible
cooking zone.
→
"Flex function", Page 14
General information for using this function:
¡
Ensure that the new cooking zone is turned off, does
not have any settings and there is no cookware on it.
¡
If you move several pieces of cookware, only the set-
tings for the cookware you moved last are transferred.
¡
If you set down an additional item of cookware on a dif-
ferent cooking zone before you have confirmed the set-
tings, the transferred settings are available for either
item of cookware. Confirm the required cooking zone.
¡
You can only transfer the booster functions from left to
right or vice versa if no other cooking zone is active.
¡
When you set down the cookware in its original position,
the settings are kept.
¡
If the flexible cooking zone is activated when moving an
item of cookware across the flexible cooking zone, the
settings are applied automatically.
Using the transfer function
Requirement: The new cooking zone is turned off.