Gaggenau CE 261, Руководство пользователя

Страница: 10 / 16

en
Wipe protection
10
10 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
10.1 Activating wipe protection
▶
Touch .
a A signal will sound.
a
The indicator lamp above lights up.
a
The control panel is locked for 30 seconds.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
play Selection
Automatic childproof lock
– Switched off
1
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
1
Automatic timer
- Switched off.
1
⁠- - Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
1
– 30 seconds.
– 1 minute.
⁠ ⁠ Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
hotplate.
1
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
again.
1
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
1
Factory setting
Dis-
play Selection
Resetting to the factory settings
– Switched off.
1
– Switched on.
1 Factory setting
11.2 Changing basic settings
Requirement:
The hob is switched off.
1.
Switch on the hob.
2.
Within the next 10 seconds press and hold for
approx. 4 seconds.
a
and flash alternately on the left-hand display.
a lights up on the right-hand display.
3.
Touch repeatedly until the required indicator ap-
pears on the left-hand display.
4.
Set the required value on the control panel.
5.
Press and hold for 4 seconds.
a The setting is activated.
Tip:
To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.