Gaggenau BSP2201.1, Руководство пользователя и инструкции по установке

Страница: 15 / 48

Home Connect
en
15
10.2 Home Connect settings
You can adjust the Home Connect settings and network settings in your appliance's basic settings.
Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance
is connected to your home network.
Symbol Basic setting Possible settings Explanation
​⁠ Connection type LAN
Wi-Fi You can switch between connection types (LAN cable
and Wi-Fi). Follow the instructions for setting up the rel-
evant connection type.
​⁠ Connection Connect
Disconnect You can switch the network connection on or off as re-
quired. The network information is retained after the ap-
pliance is switched off. After switching on the appliance,
wait for a few seconds until it reconnects to the network.
Note:
In networked standby mode, the appliance re-
quires a maximum of 2 W.
​⁠ Connect to app Start the connection process between the app and the
appliance.
​⁠ Software update As soon as a new software version is available, a mes-
sage appears on the display. In the Home Connect
menu, you can install the new software using ​⁠.
​⁠ Remote control Activate
Deactivate You can use the Home Connect app to access the appli-
ance's functions. If the remote control has been deactiv-
ated, only the appliance's operating statuses are dis-
played in the app.
The remote control is only available if you set the rotary
selector to light position ​⁠.
The light goes out after a few minutes.
​⁠ Permanent remote
start Activate
Deactivate When permanent remote start is activated, you can start
and operate your appliance at any time without prior ap-
proval on the appliance.
Permanent remote start is only available if you set the
rotary selector to light position ​⁠.
The light goes out after a few minutes.
​⁠ Delete network set-
tings You can delete all network settings from the appliance at
any time.
​⁠ Appliance information The display shows:
¡
MAC address COM module
¡
Appliance serial number
¡
Software version
Depending on the connection type, you can view more
information, such as the SSID network name, by touch-
ing the arrow button.
10.3 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.