36
en
Cleaning and maintenance
Causes of an unsatisfactory cleaning result
If the cooking compartment is still not clean once the
cleaning programme has ended, use the table below to
help you identify the causes. Then insert a new cleaning
cartridge and start the cleaning programme again.
Drying programme
You can use the drying programme to dry the cooking
compartment quickly.
The drying programme runs for 20 minutes.
Starting the drying program
1
Set the function selector to
S
. Select the drying
program with the rotary selector.
2
The
j
symbol is displayed. Touch
™
to confirm.
3
The drying time of 20 minutes appears. Touch
I
to
start. The drying time elapses on the display. The
lamp in the cooking compartment stays off.
4
A signal sounds after 20 minutes. A message
appears in the display. Touch
™
to confirm.
The drying programme has ended. Allow the appliance
to cool down. Then polish the cooking compartment and
the panel with a soft cloth.
Descaling programme
Regular descaling keeps the appliance in good
condition. The descaling program descales and rinses
the appliance fully automatically.
Depending on the type of water and your use of the
appliance, a message in the display reminds you to run
the descaling program.
To prevent damage to the appliance, the operating
modes that use steam are disabled after this message
has been repeated. You can still use the appliance to
run operating modes that do not require steam. Only
once the descaling program has been run can the
appliance be used again without restrictions.
The descaling program takes 1 hour 45 minutes from
beginning to end.
For the descaling program, you require special
descaling tablets. These are available from the after-
sales service or from our online shop (CL S30 040, set
with four descaling tablets).
Caution!
–
Risk of damage to the appliance:
Limescale may
damage the appliance. Descale the appliance
regularly.
–
Risk of damage to the appliance:
Using the
wrong descaler may damage the appliance. Only
use the specified descaling tablets.
–
Risk of damage to the cooking compartment:
Use the descaling tablet for the descaling program
only. Place the descaling tablet into the tank. Never
place the descaling tablet in the cooking
compartment or heat it up in the cooking
compartment.
Notes
–
Remove all accessories from the cooking
compartment before starting the descaling program
(wire rack, cooking containers, core temperature
probe).
–
The strainer filter must remain inserted in the
cooking compartment floor while the descaling
program is in progress.
–
Always allow the descaling program to run to the
end. The descaling program cannot be cancelled.
–
Depending on the water type and your use of the
appliance, descaling may still be required even if
you use the water descaling system (optional
accessory GF 111 100). A message appears in the
display to remind you of this.
Possible cause
Solution
Locking cap on the
cleaning cartridge
The locking cap has not been
removed from the cleaning car-
tridge.
Once the cleaning programme has
ended, remove the cartridge from
the appliance. Do not reuse the car-
tridge. Dispose of the cartridge in
accordance with the local regula-
tions.
m
Warning – Risk of injury!
To prevent the detergent from
coming into contact with your skin
or eyes, do not remove the locking
cap from a spent cartridge.
Strainer filter not
inserted
The strainer filter must remain
inserted in the cooking compart-
ment floor while the cleaning pro-
gramme is in progress.
Power failure
Following a power cut that lasts
longer than 3 minutes, the cleaning
programme is ended with a short
programme.
Stubborn burnt-on food
residues
Run the cleaning programme again
to remove stubborn food residues.
'U\LQJSURJUDPPH
_
