Gaggenau BOP2201.2, Руководство пользователя и инструкции по установке, Страница: 23 / 52

Troubleshooting
en
23
2.
Completely remove any cleaning agent residue.
3.
Turn the function selector to ⁠.
a
lights up.
4.
Press to confirm.
a
The display shows the switch-off time at which the
pyrolytic self-cleaning function will be finished.
5.
If required, you can use the rotary selector to delay
the switch-off time.
6.
Press to confirm.
7.
Press to start.
The total duration of the pyrolytic self-cleaning func-
tion comprises the cleaning time and cooling
period. The time for the relevant section of the pyro-
lytic self-cleaning function counts down on the dis-
play.
a For your safety, the appliance locks the appliance
door. During cooling, the appliance unlocks the
door opening mechanism as soon as the temperat-
ure has fallen below 200 °C.
a
The cleaning time counts down on the display.
a
If you have delayed the switch-off time, the time until
the pyrolytic self-cleaning function starts counts
down on the display.
a
The light in the cooking compartment remains
switched off.
a
A signal tone sounds once the pyrolytic self-clean-
ing function has ended.
a
The display shows a message.
8. Once the appliance has cooled down, wipe out the
ash that has been left behind in the cooking com-
partment with a damp cloth.
Depending on the type and degree of soiling, white
deposits may remain on the enamel surfaces. These
deposits are harmless. They do not affect the func-
tion or service life of your appliance.
16 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord or the appliance power cable of
this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.
16.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working. The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
Operating error.
▶
Switch off the circuit-breaker for the appliance in the fuse box and switch it back on after
approx. 60 seconds.
The appliance does
not start. The appliance door is not fully closed.
▶
Close the appliance door.
The appliance does
not work. The display
does not respond.
The display shows
the symbol for the
childproof lock . Childproof lock is activated.
▶
Deactivate the childproof lock. → Page 15
The appliance auto-
matically switches off. Safety switch-off function: No operation for more than 12 hours.
1.
Press to confirm the message.
2.
Switch off the appliance.