29
Factory setting
In the factory settings, you can adapt your appliance
individually.
1
Set the program selector to
S
.
2
Select "Factory setting" with the rotary selector.
3
Touch the
™
symbol.
4
Set the required factory setting with the rotary
selector.
5
Touch the
%
symbol.
6
Set the factory setting with the rotary selector.
7
Save with
™
or cancel with
'
and quit the
current factory setting.
8
Turn the program selector to
0
to quit the factory
setting menu.
Changes are saved.
Basic setting
Possible settings
Explanation
Brightness
Stages 1, 2, 3, 4, 5*, 6, 7, 8
Setting display brightness
Standby screen
On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: no display. Use this setting to reduce
the standby consumption of your appliance.
On: several displays can be set, confirm
"On" with
™
and choose the desired dis-
play with the rotary selector.
The selection is displayed.
Display screen
Minimized*/Standard
When
Minimized
is set, only the most impor-
tant details are displayed after a short time.
Touchpad color
Gray*/White
Select the color of symbols on the touch-
pads
Touchpad tone
Tone 1*/Tone 2/Off
Select the signal tone when touching a
touchpad
Touchpad volume
Levels 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the touchpad tone
Preheating speed/
signal
Preheating with signal
Quick heat with signal*
Preheating without signal
Quick heat without signal
The audible signal sounds when the desired
temperature is reached during preheating.
With quick heat, the desired temperature is
reached especially fast.
Signal volume
Levels 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the signal tone
Time format
AM/PM / 24 h*
Time display in 24 or 12-hour format
Time
Current time
Setting the time
Daylight savings
Manual*/Automatic
Automatic time changeover when changing
daylight savings time. If automatic: setting of
the month, day and week when the time is to
be changed. To be set separately for sum-
mer and winter time.