Gaggenau BMP 250, Руководство пользователя и инструкции по установке

Страница: 10 / 44

en
Before using for the first time
10
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial start-up
When the appliance is connected to the power supply
for the first time or following a lengthy power cut, the
settings for the initial start-up of your appliance appear.
Note:
You can change
→
Page 19 these settings at
any time in the basic settings.
Setting the language
The display shows the preset language.
1.
Use the rotary selector to set the required display
language.
2.
Press to confirm.
Note:
When you change the language, the system re-
starts. This process takes a few seconds.
Setting the time format
The display shows the two possible formats 24h and
AM/PM. The 24h time format is preselected.
1.
Use the rotary selector to set the required time
format.
2.
Press to confirm.
Setting the time
The display shows the time.
1.
Use the rotary selector to set the required time.
2.
Press to confirm.
Setting the date format
The display shows the 3 possible date formats D.M.Y,
D/M/Y and M/D/Y. The date format D.M.Y. is preselec-
ted.
1.
Use the rotary selector to set the required date
format.
2.
Press to confirm.
Setting the date
The display shows the preset date. The day setting is
active.
1.
Use the rotary selector to set the required day.
2.
Use to switch to the month setting
3.
Use the rotary selector to set the month.
4.
Use to switch to the year setting
5.
Use the rotary selector to set the year.
6.
Press to confirm.
Setting the temperature format
The display shows the two possible units °C and °F.
The unit °C is preselected.
1.
Use the rotary selector to set the required unit.
2.
Press to confirm.
Ending the initial start-up
The display shows "Initial set-up complete".
▶
Press to confirm.
a The appliance enters standby mode and the
standby screen appears. The appliance is ready to
use.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Ensure that there is no leftover packaging, ac-
cessories or other objects in the cooking compart-
ment.
2.
Clean the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Close the appliance door.
4.
Ventilate the room while the appliance is heating.
5.
Heat up the appliance for one hour at 200 °C using
Grill and Hot air modes
.
→
"Setting the type of heating and the temperat-
ure", Page 12
6.
Allow the appliance to cool down.
7.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a
dish cloth.
6.3 Cleaning the accessories
▶
Clean the accessory thoroughly with soapy water
and a soft dish cloth.
7
Basic operation
7.1 Activating the appliance
1.
To exit standby mode, open or close the door, turn
the function selector or touch a control panel.
2.
Set the required function.
Notes
¡
When "Standby screen" = "Off" is selected in the ba-
sic settings, turn the function selector to exit standby
mode.
¡
If you do not make any settings for an extended
period after activation, the standby display is shown.
¡
When the door is open, the interior lighting switches
off after a short time.
7.2 Interrupting the operation
1.
To interrupt the operation, press ⁠.
2.
Press to resume operation.
7.3 Cancelling the operation
▶
To stop the operation and delete the settings, turn
the function selector to ⁠.
Note:
The fan can also continue to run when the door
is open. This is normal.