Gaggenau BMP 224, Руководство пользователя и инструкции по установке

Страница: 9 / 32

Accessories
en
9
4.5 Standby
The appliance switches to standby mode if you have
not set any function or activated the childproof lock. In
standby mode, the brightness of the control panel is re-
duced.
Different things can be displayed in standby mode. The
GAGGENAU logo and the time are preset.
The brightness of the display depends on the vertical
viewing angle. You can change the display and the
brightness at any time in the basic settings.
→
"Basic settings", Page 18
4.6 Safety shut-off
For your safety, your appliance has a safety shut-off
function. If you do not operate your appliance for 12
hours, your appliance switches every kind of heating
off and the display shows a message.
This excludes programming using a long-term timer.
If you turn the function selector to , you are now be
able to start the appliance again as usual.
5
Accessories
Use original accessories. These have been made espe-
cially for your appliance.
The accessories supplied may differ depending on the
appliance model.
Accessories Use
Wire rack
¡
Wire rack for grilling and browning
¡
Wire rack as a place for the cookware
Glass tray Splash guard when grilling directly on the
wire rack
When grilling, place the wire rack into the
glass tray.
Tip:
You can use the glass tray as cookware
during microwave operation.
Rod
¡
Heating liquids in narrow containers
¡
Preventing delayed boiling
¡
When heating liquids, always place the
rod or a spoon into the container
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial start-up
When the appliance is connected to the power supply
for the first time or following a lengthy power cut, the
settings for the initial start-up of your appliance appear.
Note:
You can change
→
Page 18 these settings at
any time in the basic settings.
Setting the language
The display shows the preset language.
1.
Use the rotary selector to set the required display
language.
2.
Press to confirm.
Note:
When you change the language, the system re-
starts. This process takes a few seconds.
Setting the time format
The display shows the two possible formats 24h and
AM/PM. The 24h time format is preselected.
1.
Use the rotary selector to set the required time
format.
2.
Press to confirm.
Setting the time
The display shows the time.
1.
Use the rotary selector to set the required time.
2.
Press to confirm.
Setting the date format
The display shows the 3 possible date formats D.M.Y,
D/M/Y and M/D/Y. The date format D.M.Y. is preselec-
ted.
1.
Use the rotary selector to set the required date
format.
2.
Press to confirm.
Setting the date
The display shows the preset date. The day setting is
active.
1.
Use the rotary selector to set the required day.
2.
Use to switch to the month setting
3.
Use the rotary selector to set the month.