Installation instructions
en
29
22.7 Test dishes
These overviews have been produced for test institutes to facilitate appliance testing in accordance with EN
60350-1:2013 or IEC 60350-1:2011 and EN 60705:2012, IEC 60705:2010.
Defrosting with the microwave
Food
Microwave output
setting
Duration
Information
Meat, 500 g
1. 180 W
2. 90 W
1. 8 mins
2. 7 – 10 mins
Pyrex dish, 24 cm diameter
Alternative: Defrost "Minced meat" automatic
programme
Cooking with the microwave
Food
Microwave output
setting
Duration
Information
Custard, 1000 g
1. 600 W
2. 180 W
1. 11 – 12 mins
2. 8 – 10 mins
Pyrex dish
Sponge, 475 g
600 W
7 – 9 mins
Pyrex dish, 22 cm diameter
Meat loaf, 900 g
600 W
25 – 30 mins
Pyrex cake dish, 28 cm long
Cooking with the microwave and grill
Food
Microwave output
setting/type of heat-
ing
Duration
Information
Potato gratin, 1100 g 360 W + grill set-
ting 2
30 – 35 mins
Round Pyrex dish, 22 cm diameter
Cakes
-
-
Not recommended.
Chicken, halved, ap-
prox. 1100 g
360 W + grill set-
ting 3
Approx. 40 –
45 mins
Wire rack, glass tray
23
Installation instructions
Observe this information when installing the appliance.
23.1 Safe installation
Follow these safety instructions when in-
stalling the appliance.
¡
The appliance can only be used safely if it
is correctly installed according to the safety
instructions. The installer is responsible for
ensuring that the appliance works perfectly
at its installation location.
¡
Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡
Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡
Proceed in accordance with the installation
sheets for installing accessories.
¡
Fitted units must be temperature-resistant
up to 90 °C, and adjacent unit fronts up to
65 °C.
¡
Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡
Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.
