en
MicroCombi
12
10
MicroCombi
To reduce the cooking time and brown your meals, you
can use the grill in combination with the microwave.
Notes
¡
You can switch on all microwave output settings ex-
cept for 600 W and 900 W.
¡
You can also combine the MicroCombi with the se-
quential operation for the microwave.
10.1 Setting MicroCombi
Note:
You can start combined operation with the grill or
microwave output setting. This example starts with the
Grill mode.
1.
Use the function selector to set Grill mode.
2.
Use the rotary selector to set the grill setting.
a
for microwave appears in the right-hand control
panel.
3.
Use to add a microwave output setting.
4.
Use the function selector to set the required mi-
crowave output setting.
5.
Use the rotary selector to set the cooking time.
6.
Press to start.
a
The appliance starts. You can see the cooking time
counting down.
a
A signal tone sounds once the time has elapsed. If
you press , open the appliance door or set the
function selector to , you can end the signal early.
The operation has finished.
Changing settings
You can change the the grill setting or the microwave
output setting and the duration.
1.
To change the settings during the operation and
stop the operation, press .
2.
Use to focus on the grill mode or to focus on
the microwave mode.
3.
Use the function selector to change the microwave
output setting.
4.
Use the rotary selector to change the grill setting or
the duration of the microwave output setting.
5.
Press to start.
Deleting settings
1.
To delete the settings during the operation and stop
the operation, press .
2.
Use to focus on the grill mode or to focus on
the microwave mode.
3.
Use to delete the grill mode or to delete the
microwave mode.
4.
Press to start.
Interrupting the operation
1.
To interrupt the operation, press .
2.
Press to resume operation.
Cancelling the operation
▶
To stop the operation and delete the settings, turn
the function selector to .
Note:
The fan can also continue to run when the door
is open. This is normal.
11
Sequential operation
With a sequential operation, you can set up to 5 differ-
ent types of heating and cooking times that are set one
after another.
11.1 Setting a sequential operation
1.
Use the function selector to set the required mi-
crowave output setting or the grill.
2.
Press
.
a
The sequential operation menu is displayed.
3.
Use the rotary selector to set the cooking time or
grill setting.
4.
Use to select the second phase.
5.
Note:
You can set a compensation time between 2
microwave output settings so that the temperature
can be evenly distributed in the food. To set the
compensation time, press
and use the rotary se-
lector to set a duration.
Use the function selector to set the required mi-
crowave output setting or the grill.
6.
Use the rotary selector to set the cooking time or
grill setting.
7.
Use to select the third phase.
8.
Use the function selector to set the required mi-
crowave output setting or the grill.
9.
Use the rotary selector to set the cooking time or
grill setting.
10.
Use to select "Cooking time" .
11.
Use the rotary selector to set the required cooking
time.
12.
Press to confirm.
a
The main menu for the sequential operation is dis-
played. The settings for the phases are shown on
the display bar.
13.
Press to start.
a
The appliance starts. You can see the cooking time
counting down.
a
Once the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press ,
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Notes
¡
You can add the combined operation to the sequen-
tial operation.
¡
You can only select the 900 W microwave output
setting once.
¡
You cannot combine the grill with the 600 W and
900 W microwave output setting.
¡
The order of each setting is entirely up to you. You
can start with the duration, the microwave output
setting or the grill.
¡
If you open the appliance door during cooking, the
fan may continue to run.
