Gaggenau AI 442 720, Инструкция по использованию и уходу, Страница: 15 / 48

15
Troubleshooting
You can often easily eliminate problems that may
occur on your own. Before calling customer service,
take into account the following information.
9
WARNING
Risk of electric shock
Improper repairs are dangerous. Only an after-
sales technician trained by us may perform
repairs and may replace damaged connecting
leads. Remove the mains plug or deactivate the
fuse in the fuse box if the appliance is defective.
Call after-sales service.
9
WARNING
Risk of injury
The light emitted by LED lights is very dazzling,
and can damage the eyes (risk group 1). Do not
look directly into the switched on LED lights for
longer than 100 seconds.
LED lights
Defective LED lights may be replaced by the
manufacturer, his customer service or a qualified
technician (electrician) only.
Fault table
--------
Disruption Possible cause Solution
The appliance does not work The plug is not plugged in Connect the appliance to the electricity
supply
Power failure Check whether other kitchen appliances
are working
The fuse is faulty Check in the fuse box to make sure that
the fuse for the appliance is in working
order
The appliance does not work, all buttons
flash The network cable plug is not plugged
in Check network cable connection for all
appliances
The fuse is faulty Check in the fuse box to make sure that
the fuses for all appliances are in work-
ing order
A component of the appliance has failed Call Customer Service
The appliance does not work The appliance has been operating for
longer than 4 hours, safety shut-off was
activated Switch the appliance on again
The button illumination does not work The control unit is faulty Call Customer Service
The lighting does not work The lighting is defective Call Customer Service
The
œ
button flashes
The metal filter is saturated Clean the filter, see the
Cleaning and
maintenance
section