50
en
Installation
Fitting the filter cover
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1
Open the hinges on the filter cover.
2
Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
3
Tighten the fastening screws of the hinges.
4
Swing the filter cover up and ensure that it
engages.
5
Connect a power supply.
Removing the appliance
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
m
Warning – Risk of injury!
The appliance is heavy. To move the appliance, 2 people
are required. Use only suitable tools and equipment.
1
Disconnect the appliance from the power supply.
2
Press down on the locks on the filter cover.
Note:
The filter cover is heavy. Take the filter cover
by two hands and hold in place.
3
Open the filter cover fully and without pulling on it.
4
Undo the screws on the hinges up to approx. 7
mm.
Note:
Do not loosen them fully.
5
Unhook and remove the filter cover.
6
Remove the grease filters.
