4
REV 4/22
GB752SR
-
8 INSTALLATION TOOL
SPECIFICATIONS
Hand Held Weight
-
2.00 lbs. (.91 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.500" (12.7 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
3,800 lbs. (16.9 kN)
Vibration
-
Tested
-
No Hazards Found
The GB752SR
-
8 is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in
hand weighs 2.00 lbs. (.91 kg). The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a
.500” (12.7
mm) fastener setting
stroke and a rated pull load of 3,800 lbs. (16.9 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB752SR
-
8 split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) air pressure
providing maximum efficiency. At 90 psi. (6.2 bar) air pressure, the GB752SR
-
8 does not exceed 81.5 dB(A) and consumes .30 SCF/
cycle (8.50 L/cycle).
The GB752SR
-
8 comes with 8 feet (2.4 m) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet has a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on page 20 for nose assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB752SR
-
8 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
