background image

Thank you for choosing the Gadgetree Pulse Bluetooth

®

 Speaker. Play music from any mobile 

device wirelessly with Bluetooth

®

 and watch the LED lights pulsate to the beat of your music.

WHAT’S IN THE BOX

•  Speaker

•  USB ch AUX 2-in-1 cable

PRODUCT FEATURES

1. 

   VOLUME UP (short push)/

 

NEXT SONG (long push)

2. 

  VOLUME DOWN (short push)/

   

PREVIOUS SONG (long push)

3. 

  PLAy/PAUSE/ANSWER & END cALL

OPERATION

1.  Press the ON/OFF button located on the top of the speaker. When active, the speaker’s audio will prompt “The Bluetooth

®

 device is ready to pair”.

2.  Using your Bluetooth

®

-enabled smart device, find “Gadget 8047866” from the pairing list. (

Tip:

 Ensure the Bluetooth

®

 is enabled on your device.)

3.  Upon successful connection, the speaker’s audio will emit two short ascending beeps. The speaker will reconnect automatically if your smart device 

has been paired previously. When disconnecting, the speaker will emit two short descending beeps.

4.  See speaker illustration for general function guidelines.

connect to any 

USB port to charge 

or play music

Plug into 3.5mm devices

HANDSFREE CALLING

1.  To answer an incoming call, press the PLAy/PAUSE button.

2.  To end or reject an incoming call, press and hold the PLAy/PAUSE button.

3.  Double-press the PLAy/PAUSE button to redial the last number called on your mobile device.

AUDIO INPUT (AUX-IN MODE)

In addition to Bluetooth

®

, this speaker can play music using the 3.5mm audio cable included in the box.

1.  Using the 3.5mm audio cable, connect the speaker to a smart device with 3.5mm audio port.

2.  Press and hold the   button to enter AUX mode. The speaker will emit one short beep when connected.

3.  When in AUX-IN mode, all speaker functions such as PLAy, PAUSE and TRAcK SELEcTION will have to be operated from the smart device.

Tip:

 If there is no sound during AUX-IN mode, check to ensure the speaker is not already paired via Bluetooth

®

.

CHARGING THIS DEVICE

1.  The speaker will emit 3 descending beeps when battery is low.

2.  Using the 2-in-1 cable included in the box, connect the speaker to a USB charging port.

3.  The charging indicator will turn red when charging and then turn off when the speaker is fully charged. Approximate charging time is 2-3 hours.

It is recommended to disconnect the charging cable after charging is complete. Do not leave the charging cable inserted when the speaker is not in use.

PRODUCT SPECIFICATIONS

•  Bluetooth

®

 connection range: 10 metres

•  charging time: Approximately 2-3 hours

•  Battery: built-in 800mAH Li-battery

•  charging input: 3.7V 1A

 

 

PULSE BLUETOOTH

®

 SPEAKER

Operating Instructions

8047866

Содержание 8047866

Страница 1: ...s and hold the PLAY PAUSE button 3 Double press the PLAY PAUSE button to redial the last number called on your mobile device AUDIO INPUT AUX IN MODE In addition to Bluetooth this speaker can play music using the 3 5mm audio cable included in the box 1 Using the 3 5mm audio cable connect the speaker to a smart device with 3 5mm audio port 2 Press and hold the button to enter AUX mode The speaker wi...

Страница 2: ... other than those set out above you may have ad ditional statutory rights which will vary under the laws of the various countries states provinces and other governmental entities in which The Source operates This warranty is subject to all statutory rights you may have in Canada THE SOURCE WARRANTY 2016 The Source All rights reserved Imported by The Source Barrie Ontario Canada L4M 4W5 Manufacture...

Страница 3: ...e is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the...

Страница 4: ...cluding interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autorisée aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radioélectrique subi même si le brouillage est su...

Отзывы: