244
8. Accident handling
8.6 Emergency start
Jumper cable
If the engine cannot be started due to low
battery level, the engine can be started by
connecting to the battery of the other vehicle
via jumper cable.
CAUTION
Before jumper cable operation, be sure
to turn off all electrical equipment of the
vehicle with depleted battery, such as
headlamp, A/C, AV system, etc.
WARNING
● The engine compartment is a high-
risk area, and improper operation can
easily lead to casualties.
● Be sure to carefully read and follow
the safety warning instructions
before starting the battery operation.
1. Open the engine hood and pull up the
battery positive cover in the direction of
the arrow.
2. Connect the clip of the red positive jumper
cable to the battery positive pole position
①
of the vehicle, and connect the clip
at the other end to the positive pole of
the other vehicle battery; Connect the
clip of the black negative jumper cable to
the battery negative pole position
②
of
the vehicle, and connect the clip at the
other end to the engine block of the other
vehicle or the metal part firmly connected
to the engine block.
3. Start the engine of the vehicle with the
battery to supply, let it run at idle speed,
and then start the engine of the vehicle
with the battery to be supplied until the
engine runs smoothly.
4. Remove the jumper cable in the reverse
order after the engine runs smoothly.
