114
4. Operation of systems and equipment
4.6.6 C h i l d s e a t w i t h s m a r t
Bluetooth*
Connect Bluetooth seat
Fasten the Bluetooth seat belt, turn on the
Bluetooth switch in the Bluetooth setting
interface, and check the available Bluetooth
devices. The Bluetooth device “Welldon_
xxxxxx” is displayed.
- Click on the Bluetooth device “Welldon_
xxxxxx” to connect it. After the connection
is successful, “Connected” will be
displayed.
- Click “Disconnect” to disconnect the
Bluetooth child seat.
- Click “Ignore the device”, so the
confirmation window for ignoring the
Bluetooth device pops up. Click “Cancel”
to keep the Bluetooth device connected.
Click “Confirm” to disconnect the
Bluetooth device, so the Bluetooth device
“Welldon_xxxxxx” is removed from the list.
When the child leaves the seat for a period
of time, Bluetooth will go to sleep. Wake up
Bluetooth again as follows:
- Trigger the seat cushion switch manually.
- Restart the device.
NOTE
● The communication function of the smart
Bluetooth child seat is only suitable for
Welldon Zhixuan - customized model for
GAC.
● When the Bluetooth device “Welldon_
xxxxx” is connected successfully for
the first time, the system will connect
automatically the next time it needs to
be used.
Bluetooth seat alarm
During the normal use of the Bluetooth seat,
if the seat belt is loose, an alarm message
reading “The child seat belt is not fastened
properly. Please fasten the seat belt to ensure
the safety of children.” will pop up in the AV
system interface and always exists. After the
seat belt is fastened, the pop-up alarm window
disappears.