G-WEIKE LF1390, Инструкция по использованию

Страница: 71 / 75

G.Weike Laser
Profession Laser Manufacturer more than 15 Years.
64
6.5 Machinery Lubrication
6.5.1 Lubrication of gear and rack

Use rust inhibitor (
WD-40
) to clean up the gear and rack

Use hand spray type butter(dinosaurs 192) to lubricate the gear and rack
6.5.2 Linear slide rail lubrication

With the grease gun(R-301),put the lithium base grease(MP-3) into the
centralized lubrication. As you know, without lubrication , there will be
much friction on the linear slide rail , and this will reduce the slide rail’s
lifetime.

The grease for linear slide rail and chain sprocket is lithium grease, we
suggest you to use “Jinguan Lithim grease MP-3”.With grease gun to inject
grease into the slider(In addition, because of the structure--the linear guide
rail is sealed in the dust-cover’s bellows,we need open the dust-cover’s
bellows when you inject the grease)
6.6 Maintenance when you stop use the machine during long-
time
When want to stop using the machine during a long time, for the moving parts,
please butter them ,make anti-embroidered paper package.For other parts
please periodically check if there’s the rust phenomenon, and make the
cleaning, anti-rust processes for the rusty parts(if conditions permit. You can add
one dust-cover on the parts). In addition, please check and clean the machine
regularly.
6.7 Storage conditions, storage period and matters needing
attention
Machine tool storage environment should avoid the rain, moisture, tilt, rat,
potholes, such as damage, and ensure the well ventilated, storage temperature
within the range - 10
℃
~ + 40
℃
, relative humidity is not more than 70%.
Transportation and storage time not more than 24 hours, allowing the
environment temperature does not exceed 70
℃
. Prohibit put the machine in in
open air for a long time. Because all sorts of reasons to temporarily store, truly
besides should comply with the above requirements, should also check their
condition and packaging, to ensure that the machine from damage.
6.8 Quick-wear parts list
Protective Mirror
Collimating lens
Brass nozzles
Focus lens