G-Tek LmNet - PRO 614-00, Руководство по эксплуатации

Страница: 35 / 53

G-Tek Corporation Private Limited 34
7.3.9 Channel 1
There are 4 input channels available for the user to configure and use. Thus, user can select any of the
channel and can set the below mentioned parameters for it. There are 8 various parameters in each
channel, but each channel has its different parameter values according to its use decided by user.
Those parameters of every channel discussed below in detail.
To set this parameter then follow the procedure shown in figure-36 by pressing appropriate key of
LmNet.
Figure 36 Channel Configuration
SEnSor
rAngE Lo
CHnL 1
SPAn
oFFSEt
mULtiPLy
rESoLUtn
ALrm SPH
ALrm SPL
1 128.55