G-Tek Corporation Pvt. LTD
6
Introduction
1.4.1
Status LEDs
There are two status LEDs available on LM Pro RF device for the indication of device status. The
meaning of both the LEDs are described as below:
HBT
Heartbeat LED will be flickered at every 5 minutes for updating time of data,
after that it will be OFF till next interval comes.
STR
Storage LED will be flickered with Heartbeat LED, if Batch is ON at every 5
minutes. Otherwise, Storage LED will remain in OFF state if Batch is OFF.
1.4.2
Display LCD
The LCD display is 3 ½ digit display shows the Temperature and %RH value with its units, alarm
high/low indication and Recording indication as per the operation of the device. The LCD display parts
are shown in figure 2.
Figure 2 LCD Display
1)
Measurement Program running (Batch running)
2)
Alarm set limit value(s) exceeded.
3)
Current reading
4)
Units (%RH, °C)
5)
Upper limit value exceeded
6)
Lower limit value exceeded
