G-Technology G-RAID Studio, Инструкция по установке

Страница: 5 / 15

G-RAID Installation Guide
Page 5
5. G-RAID OVERVIEW
6. OPTIMIZING DATA TRANSFER RATES
G-RAID can be connected to any Mac or PC equipped with a
FireWire 400 or FireWire 800 port. For optimal performance,
G-RAID should be connected via a FireWire 800 port. Many
Macintosh G4s, PowerBook G4s and all G5s have a built-in
FireWire 800 port. Most new PCs have a built-in FireWire 400
ports.
For Mac and PC computers that do not support FireWire 800,
install the G-Tech FireWire 800 PCI card (for desktops) or the
FireWire 800 CardBus adapter (for laptops) shown below. You
can purchase these adapters by contacting G-Tech Sales at
(310) 449-4599 or simply buy online at
www.g-technology.com .
FireWire 800 PCI Adapter
(2) FireWire 800 Ports, (2) FireWire 400 ports
FireWire 800 CardBus Adapter
(2) FireWire 800 ports, (1) 400 port
Note: The G-Tech FireWire 800 PCI adapter requires a 64-bit PCI slot to
operate at FireWire 800 speeds. The adapter operates at FireWire 400
speeds when installed in a 32-bit PCI slot.
Note: If you wish to use G-RAID in conjunction with AJA’s Io, Avid’s Mojo or
any other video editing system that utilizes a FireWire connection, you must
connect G-RAID to either the G-Tech FireWire 800 PCI adapter or FireWire
800 CardBus adapter for proper operation.
Power and Activity LED
FireWire 800 Ports
FireWire
400 Port
On/Off Switch
Fan
Security Slot
Power
Connector