47
APPENDIX C: HARD DISK INSTALLATION
1.
Hard drive jumpers need to be set properly in order to make DVR function correctly.
2.
Remove DVR top cover by taking out screws from location shown below:
①
②
③
④
3
. Below picture indicates a DVR without a H.D.D installed.
4
. Please refer to the instruction from hard drive manufactory for correct jumper setting on (master)
mode of the hard drive, mounting the hard drive over DVR base by facing SATA interface to
DVR main board. Match screw holes from bottom to bottom of hard drive and the DVR. Turn
over the DVR from top to bottom side and then mounting up the hard drive by using screws from
Содержание GT804M
Страница 17: ...17 D ALARM SETUP H SYSTEM SETUP...