G+M Elektronik GM-1525-AM, Инструкция по эксплуатации

Страница: 18 / 23

gm-elektronik.swiss | adm@gm-elektronik.swiss
GM-1525-AM
Page 18 | 23 Operating instruction 1706.003
7. DAB radio mode
DAB radio mode receives DAB / DAB+ digital radio and displays information
about the station, stream and track playing.
To enter DAB mode, either press Mode until the display shows DAB Radio or
select Menu > Main menu > DAB .
7.1. Scanning for stations
The first time you select DAB radio mode, or if the station list is empty, the unit
automatically performs a full scan to see what stations are available. You may
also need to start a scan manually to update the list of stations for one of the
following reasons:
• Available stations change from time to time.
• If reception was not good for the original scan (for example the antenna was
not up), this may result in an empty or incomplete list of available stations.
• If you have poor reception of some stations (burbling), you may wish to list
only stations with good signal strength.
To start a scan manually, select Menu > Scan .
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but unavailable, select Menu > Prune in-
valid .
7.2. Selecting stations
To listen to or change a station, turn the Select control to view a list of stations
and press to select. Once selected, the station plays and the screen shows
information about the station, track or show as broadcast.
Presets:
To store a DAB preset, press and hold
Preset until the display shows the
Save preset screen. Select one of the 10 presets to save the currently playing
station.
To select a preset, press Preset briefly, then select one of the listed preset sta-
tions. When a preset station is playing, it shows Pn (P1, P2, …) in the bottom
right of the screen.
7.3. Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic La-
bel Segment) information broadcast by the station giving real-time information
such as programme name, track title and contact details. Stereo broadcasts
are indicated with an icon at the top of the screen. To view further information,
press
Info .
Each time you press Info , another set of information is displayed, cycling
through DLS text, programme type, ensemble name / frequency, signal
strength / error rate, bit rate / codec / channels and current date.