Thak you for purchasing a G-FORCE product.
Our
passion is the development and production of gaming
devices for all enthusiasts of simulators and games. G-
FORCE manufactures and develops a range of control
panels for simulator and game enthusiasts. We produce
a limited number of custom devices, it is not serial
production. In our products you will find a functional
design, user-friendly controls and a quality selection of
components. We produce plastic parts using 3D printing
technology and all parts are specially designed for our
products. For more informations and news please visit
our website www.gforcecontrol.com
We wish you a lot of great gaming experience with G-
FORCE by controlling your planes, tanks, ships, cars or
your others favorite games.
G-FORCE
Under control
CP-36S
PILOT/uni
USER MANUAL
English V.1.1
USB Game Control Panel
Product Description
Installation on PC
Table holder THA1
Pilot / Uni version
Control panel CP-36S is a full programmable device that
allows you to assign functions from your simulator or
game. You can control the functions with switches,
encoders and axes. The panel is great for flight
simulators, but can also be used for any other simulators
or games. In the basic mode, this panel allows the control
of 28 switches functions and 4 encoders for entering
values or controlling the axes by changing the firmware.
If your simulator or game supports the mod-switch
function, you can use the panel to control up to 112
buttons and 16 encoders using the "MODE" rotary
switch.
The device has a compact small size and is very easy to
use. You do not need to install any drivers. It is full
compatible with USB 2.0 and PC Windows operating
systems.
1/ Connect the USB (B) connector on the back side of the
panel.
2/ Connect the USB (A) connector to one of your free
computers USB ports. Windows 7 or higher will
automatically detect the new game device.
3/ The drivers are installed automatically.
4/ Click
Start/Settings/Control Panel
and then double-
click
Game Controlers
. The
Game Controllers
dialog
box display the joystick name "G-FORCE CP-36S" with
OK status.
5/ In the
Control Panel
, click
Properties
to configure
your joystick.
Test device
: Lets you test and view all of
your panel functions.
The holder THA1 is fixed to the panel with M5 screws and
is ready to use . The holder is adjustable in three
operation positions, flat, (A) angle 25 °, (B) angle 40°.
Fig.1
Both versions have the same controller functions. The
"Pilot" version has the design of the Gear and Flaps
controls with a description on the label.
-1-
-3-
Fig.1
-2-
With control panel CP-36S you can control 32 buttons and PoV Hat
Left / Right / Up / Down.
B - 40°
A - 25°
Pilot
Uni
In the basic setting, the slider
function is disabled.
By changing the settings in the
configuration software
FreeJoyQT, you can control and
set the axes with encoders.
In the configuration software, all
functions of the controllers are
fully programmable according to
the user's needs.
G-FORCE Home
