BrassBlender
Beautiful Blending Borrowed
from the BrassMaster
Contents of this document are ©2016 Pedal Parts Ltd.
No reproduction permitted without the express written
permission of Pedal Parts Ltd. All rights reserved.
Страница 1: ...ender Beautiful Blending Borrowed from the BrassMaster Contents of this document are 2016 Pedal Parts Ltd No reproduction permitted without the express written permission of Pedal Parts Ltd All rights reserved ...
Страница 2: ...R22 CLR C1 47p C2 1u elec C3 1u elec C4 1u elec C5 47n C6 1u elec C7 1u elec C8 3n3 C9 47n C10 1u elec C11 1u elec C12 1u elec C13 10u elec C14 22u elec Q1 5 2N5210 RETURN 10KA SEND 10KA THRU 10KA TONE 100KB T BYP DPDT ON ON PHASE SPDT ON ON You can probably use any amount of BJTs for Q1 5 but here at FDHQ we ve only tried the 2N5210 as listed on Moosapotamus original schematic ...
Страница 3: ... the electrolytic capacitors go into the square pads Snap the small metal tag off the pots so they can be mounted flush in the box Pot mounts on the back side of the board You can use vertical mount or just wire up normal pots These should be mounted last as you ll have no access to a lot of the PCB pads once they re in place PCB Layout 2016 Pedal Parts Ltd EFFECT SEND EFFECT RETURN IN OUT The IN ...
