Original User Manual FUXTEC 20V Leaf Blower FX-E1LB20
10
Operating notes
- Before you start, install the blowpipe on the device (see following figure).
- Hold the device in the working position (see following figure).
- Hold the blowpipe a few centimetres above the ground and make sweeping movements from one
side to the other.
- Slowly move forward.
- Keep the accumulated pile of dirt in front of you and blow from the outer edges. Do not blow into
the middle of a pile of dirt.
- A reduced blowing speed is best for light material.
- For heavier material and coarse dirt, a higher blowing speed is used.
- Use a rake or broom to loosen any waste adhering to the ground beforehand.
- Spray very dusty waste lightly with water to avoid excessive dust formation.
