00025949.DOC, Version 1.4
53/103
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
1300 W
DMX-control-channels:
17
DMX-512-connection:
3-pin XLR
Flash-rate:
10 Hz
Colour-system:
CMY colour-mixture
Colour-wheel:
4 dichroic filters plus white, CTO and CTB correction-
filters, UV-filter
Maximum PAN-movement 630°:
in 3.5 s
Maximum TILT-movement 265°:
in 2.5 s
Length of base (including handles):
530 mm
Width of yoke:
390 mm
Height (head horizontal):
540 mm
Weight (net):
37 kg
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
B
(steady state): 80° C
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.5 m
Fuse:
T 10 A, 250 V
Accessory:
GE CSR 700/2 72V/700W G-22 1000h
No. 89105000
PHILIPS MSR700/2 72V/700W G-22 7200K
No. 89105016
FUTURELIGHT CP-240 controller
No. 51834265
FUTURELIGHT CP-256/64 controller 16bit
No. 51834288
FUTURELIGHT CP-512/64 controller 16bit
No. 51834295
Wizard-512 USB DMX-So Interface
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
Flightcase for 2x PHS/PHW-700+reel-board
No. 51836865
FUTURELIGHT DES-3 DMX-terminator 3-pin
No. 51834001
Please note: Every information is subject to change without prior notice. 22.10.2007©
