00050064.DOC, Version 1.1
24/27
Control Board
The Control Board offers several features: you can e. g. simply set the starting address.
The main menu is accessed by pressing the Enter-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Esc-button. The functions provided are described in the following sections.
Default settings shaded.
Main
menu
Sub menu
Display
Function
DMX ADDRESS
DMX
address
: 1-512
DMX address setting
2 Channel mode
2 channel mode
DMX OPERATION
MODE
5 Channel mode
5 channel mode
D
M
X
M
o
d
e
SET AS SLAVE
ON/OFF
Set unit to slave
MASTER
Master
MANUAL
OPERATION MODE
STAND ALONE
Stand Alone
BLACK OUT
Blackout
White value
Preset value:
XXX
New value:
0
-
255
Set white LED value
Amber value
Preset value:
XXX
New value
: 0
-
255
Set amber LED value
SET STATIC COLOR
Strobe value
Preset value:
XXX
New value: 0 – 255
Set strobe value
FACTORY RESET
YES (ENTER)
Restore factory settings
O
th
er
F
u
n
ct
io
n
s
SOFTWARE
VERSION
Vx.x
Software version of each
IC
DMX Mode
• Press
[ENTER]
to enter the main menu
"DMX Mode"
.
• Press
[ENTER]
and select
"DMX ADDRESS"
,
"DMX OPERATION MODE"
or
"SET AS SLAVE"
by
pressing
[UP]
or
[DN]
.
• Press
[ENTER]
for selecting the desired sub menu.
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“DMX ADDRESS“
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, adjust the DMX address by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[ESC]
in order to return to main menu.
Adjust DMX channel mode
With this function, you can adjust the DMX channel mode.
• Select
“DMX OPERATION MODE”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm; the display shows
“2 Channel mode”
.
• Press
[UP]
to select
“5 Channel mode”
, or
“2 Channel mode”
.
• Press
[ENTER]
to confirm.
• Press
[ESC]
in order to return to the main menu.
Slave setting
With this function, you can define the device as slave. When this function is activated, the unit will turn
to address 1 and 5 channel mode. This setting is not available if this function is OFF.
• Select
“SET AS SLAVE”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[ESC]
in order to return to the main menu.
M
A
N
U
A
L
C
O
N
T
R
O
L
